Printer Software Installation

Step by Step:

Step 1: Choose Install on the AutoPlay menu

epson-1

Step 2: Choose Custom Install

epson-2

Step 3: Choose Alphanumeric\Next

epson-3Step 4: Choose EpsonNet Config and EpsonNet Simple Viewer. Click Next

epson-4

Step 5: Click Install

epson-5

epson-6

Step 6: Click Next

epson-7

Step 7: Choose Agree and click Install

epson-8

epson-9

Step 8: Click Next

epson-10

Step 9: Set the Name of the Printer

epson-11

Step 10: Switch the Port Type to Ethernet

epson-12

Step 11: Enter the IP address you want to assign to this printer into the IP Address field and click the Set to Printer button

epson-13

Step 12: Make sure you have paper loaded and turn the printer on. The printer will print out a few lines showing the IP configuration. Click Next

epson-14

Step 13: Click on the Printer shown in lower section of this window and click Setting

epson-15

Step 14: Confirm that the IP address is what you want it to be and click OK

epson-16

Step 15: Click Yes to proceed

epson-17

Step 16: Click OK (default password is blank)

epson-18

epson-19

Step 17: Click OK

epson-20

Step 18: Choose Yes

epson-21

 - On this screen you should see in the address field that you are connected to the IP address you set for the printer

Step 19: Click on the X in the upper right to close this window

epson-22

Step 20: Check the Set as Default Printer box and hit the Save Settings button

epson-23

Step 21: Choose No

Step 22: Click Next

epson-24

Step 23: Click Close

epson-25epson-26

Step 24: Check the Run TM-T88V Utility box and click Finish

epson-27

Step 25: 

 - If the Printer Port is not shown jump down to the Adding a Printer Port section below

 - If the correct printer and port is shown, Click OK and you will see the screenshot below with your printer details

epson-28

To continue your installation, jump down to the Adding the Printer to this computer section below


Adding a Printer Port

Step 1: In the TM-T88V Utility, if your printer isn't show, Click Add Port

Step 2: Select Ethernet and you should see your printer listed

epson-29

Step 3: Click on your printers IP address in the box and click the communication test button

epson-30

Step 4: Click OK. Click OK again

epons-31

 - You will see a Communicating with Printer window and will then see the window below

epson-32

Step 5: Click on the X in the upper right to close this window


Adding the Printer to this computer

Step 1: Open Devices and Printers

epson-33

Step 2: Click on Add a Printer

epson-34

Step 3: Choose Add a Local Printer

epson-35Step 4: Choose Create a new port. From the drop down select Standard TCP/IP Port, and click Next

epson-36Step 5: Uncheck the Query the Printer box. Enter the IP address you assigned to your Printer and click Next

epson-37epson-38

Step 6: From the installation we did earlier, you will find the correct driver listed in the drop down. Select this and click Next

epson-39

Step 7: Choose Replace the current driver and click Next

epson-40

Step 8: Enter the name you want this printer to have and click Next

epson-41

Step 9: Choose Do not share this printer and click Next

epson-42

Step 10: Click Finish


How to set it to Auto-Open the Cash Drawer:

Step 1: In Devices and Printers, right click on this printer and choose Printer Properties

epson-43

Step 2: Click on Preferences

epson-44

Step 3: At the top select the Peripherals tab

epson-45

Step 4: In the Peripherals drop down, choose Cash Drawer

epson-46

Step 5: Select Open for Cash Drawer #1 and hit OK

Step 6: Click Ok to save and exit printer properties